Creep Feed Grinding

Surface Grinding

 Grinding Systems Grinding Wheels Filtration

Cylindrical Grinding

 EDM Sub Contracting Tooling Service

Blohm

 Jung Mägerle Tyrolit Oberlin Cylindrical Grinding Joemars Sub Contracting Contact Home
                 
 

J.R.A.BENNETT LTD

Orchard Farm

Lutterworth Road

Burbage  Hinckley

Leicestershire LE10 3 AH

 

Telephone: 01455 250400

Fax:             01455 250651

Email: info@jrabennett.co.uk

 

 

Oberlin Filter

Cleanable Belt Filter

0.1 metre to 4.5 metre

 
Pressure Media Filter

0.1 metre to 4.5 metre

 

 

 

 

 

 

 

 

  

Oberlin pressure filters of all your filtration requirements.

Filtration Solutions

How the filter works
     
Filtration How the Filter works Applications
     

1. FILTERING CYCLE:
 First the pneumatic airbag holds the filter upper chamber against the lower chamber. Platen seals on the perimeter of the chambers create a liquid-tight seal completely around the filter media or cleanable belt. Solids-bearing liquid is pumped into the upper chamber. Pump pressure forces the liquid through the filter media or cleanable belt. The filtered liquid is collected in the lower chamber and drains out. Solids are held back by the filter media or cleanable belt.

 
 

 

 

 

 

 

 

 

 

 

 

 
2. DRYING CYCLE:
 When the filter pressure reaches 30-40 psi (or higher in some applications), pressurized air or gas is fed into the upper chamber. This forces the liquid through the filtered solids and media or cleanable belt. After the solids are dried, determined by the back pressure and time elapsed, the chamber is lifted.

 

 

 
3. DISCHARGE CYCLE:
 The solids are automatically discharged using a disposable media re-roller or an endless cleanable belt conveyor. The belt discharges the filtered solids into a hopper. After discharging, the upper chamber automatically descends and a new filtration cycle starts.